-

Restore - Protect - Maintain  0161 444 0377

  The Tile Master is a Nationwide tile cleaning company specialising in grout cleaning & sealing of floors

Blog

The Tile Master is a Tile Cleaning, DIY Rental Manchine.

view:  full / summary

Tile Master Brighton Deep Cleans Safety Floor Toliets

Posted on 21 March, 2017 at 10:05 Comments comments (0)

TOILET SAFETY FLOOR DEEP CLEAN

TileMaster Brighton Deep Clean Toilet Safety floors in Brighton & Hove

Location: Sports Centre, Brighton and Hove

Contractor: TileMaster Brighton

http/www.thetilemaster.co.uk/brighton

 

Product Specification:

Tile Master Cleaner Number 3 - degreaser

Tile Master Pad A - Deep cleaning pad

Surface Treated:

Internal Safety Floors in Toliet

Job History

The Manager of this Sports Complex in Hove and Broghton was very impressed with the cleaning results Darren achieved using the Tile Master System.

Our TileMaster machine brings a new dimension to the deep cleaning of hard floors!!

 

Client Requirements

The customer required the following from the contractor

1) The natural look and texture of the tile keeping

2) Removal of all builders dirt and dust from the tiles

3) A clean consistant finish, with no seal or shine

Tile Master Specification

TileMaster Cleaner number 3 were specified to deep clean the tiles and remove the ingrained dirt that was present. The product needs to be applied and left to dwell for up to 30mins in some areas to completely remove the issues that were present.


Video of our Work

You need Adobe Flash Player to view this content.



Tile Master Manchester Deep Clean Royal Exchange Tiles

Posted on 15 February, 2017 at 8:15 Comments comments (0)

Case Study

TileMaster Manchester Deep Clean tiles in Royal Exchange Arcade

 

Location: Royal Exchange Arcade, Manchester City Centre

Contractor: TileMaster Manchester Central

http/www.thetilemaster.co.uk/manchester-central 


Product Specification:

 

  • Tile Master Cleaner Number 4 – Builders Dirt and Dust Remover
  • Tile Master Cleaner Number 3

 

Surface Treated:

Internal Textures Porcelain R9 rating

 

Job History

These porcelain tiles were laid and installed at the start of the building project.  Even thou there were protected, builder dirt and dust ended up leaving the tiles patchy looking for hand over.  Tilemaster have a great relationship with Pavigres, the tile manufactures, and they recommonded our service team in Manchester to carry out the clean.

 


Client Requirements

The customer required the following from the contractor

1) The natural look and texture of the tile keeping

2) Removal of all builders dirt and dust from the tiles

3) A clean consistant finish, with no seal or shine

Tile Master Specification

TileMaster Cleaner number 3 and 4 were specified to deep clean the tiles and remove the ingrained dirt that was present. The product needs to be applied neat and left to dwell for up to 30mins in some areas to completely remove the issues that were present.  

 

Before & After Pictures

You need Adobe Flash Player to view this content.



Case Study - Tile Master Algo Restores White Limestone Patio

Posted on 11 October, 2016 at 13:20 Comments comments (0)

Case Study

Tile Master Algo Restores White Limestone Patio


Location: Bramhall Stockport, Cheshire

Contractor: Tile Master Floor Care Stockport

www.tilemasterfloorcare.co.uk 

Product Specification:

 

 

Surface Treated: Exterior White Limestone Patio 


Job History

This white limestone patio was laid and installed over 3 years ago. Soon after installation, mould and algae started to form in the pours of the limestone, as moisture could penetrate into the tile and sit there for long enough for the mould to take hold and start to grow. Numerous jet washing attempts were tried before the customer contacted Tile Master Floor Care in Stockport.


Client Requirements

The customer required the following from the contractor

1) The natural look and texture of the tile keeping

2) Removal of all mould and algea from the tiles

3) A water proofing sealer to prevent and slow down the formation of the mould returning

4) Protection from oil around the BBQ areas

5) A seal that create no shine of effect on the slip resistance

 

Tile Master Specification

TileMaster Algo was specified to deep clean the tiles and remove the ingrained mould and algea that was present. The product need to be applied neat and left to dwell for up to 1 hour in some areas to completely remove the issues that were present.  Algo is a professional grade outdoor product which is ideal to clean and remove the unsightly look of algae, grey lichens and black spots from all masonry and natural stone

Tile Master All in One Solvent Sealer is a deep penetration solvent based sealer offer excellent stain protection against both oil and water. As the whole patio is used for entertaining, the client agreed that oil and water protection was required all over.


Before & After Pictures



 


 

Contract cleaning company in Liverpool use TileMaster to solve floor problem

Posted on 17 November, 2014 at 6:35 Comments comments (1)

TileMaster received a sample tile from Pavigres Europe relating to a tile installation within a busy shopping centre in Liverpool. The request was to evaluate if the supplied tile was cleanable, what methods and cleaning products should be followed as it was reported:

• The floor becames dirty very easy

• The floor was susceptible to staining

• The floor pads being used were not effective and being ripped up whilst cleaning was in progress

• The floor couldn't be maintained correctly

TileMaster cleaned two small area’s using TileMaster Cleaner No.1 diluted 1:50 without rinsing and TileMaster Cleaner No.3 diluted 1:5 and rinsed. TileMaster Cleaner No.1 was sufficient to clean the surface removing dirt and dust with the TileMaster cleaner No.3 being used for stains.

From the test analysis performed, and the observation of the floor on site, we setup a more efficient system of maintenance based on the problems and location of the floor area.

The client now has a perfectly cleaned floor together with a free maintenance schedule bespoke to their floor and environment.

If you are a contract cleaning company struggling to maintain a floor and want effective products, free training and support please give Tile Master Global a call 0800 059 9206

 

How to clean my tiles and grout in my shower

Posted on 24 July, 2014 at 13:50 Comments comments (0)

Over time your grout can become very discoloured and dirty, leaving your floors and walls looking very unsightly. Even if your grout was sealed during installation dirt and residue can still build up on the grout. Sealed grout will clean easier than unsealed grout.

 

One area where grout often becomes very unsightly is in bathrooms and especially around and in the shower area. One of the major problems is that shampoos, hair dyes and skin molecules, which exfoliate during washing in the shower, all stick to your grout and discolour it as per the picture below.

 

 

One problem when trying to clean your grout is not causing damage to any of the features around the shower area. Stainless steel taps, natural stone Borders, porcelain bath-ware and shower trays may all be damaged during cleaning if incorrect chemicals are used. To clean grout in your bathroom and shower area, The Tile Master have created Cleaner Number 1.  This is a unique blend of natural cleaning solutions which effectively removes all the dirt and residue build up, but is safe and gentle on all surfaces.  Being a PH Nautral Cleaner, it effectively cleans and removes body fats and scale build up. Once the process is complete the grout will be cleaned and at a like new state. As per the picture Below.

 

The process for cleaning this kind of surface is below.

Cleaning and Restoring your grout in your shower area 

1. Dilute Cleaner No 1 - 1:4 with water in a measuring jug.

2. Apply solution to the surface with a hand sprayer with a fine mist to a small section at a time. (Tip: use an old sprayer from a finished kitchen sprayer or bathroom sprayer from the supermarket).

3. Allow the product to dwell for a few minutes to work and break down the body fats, shampoo and limescale.

4. Agitate to break the bond between the grout and the dirt with The Tile Master Grout Brush.  Whilst doing this we recommend you keep spraying the grout joints you are scrubbing.

 

5.once the joint is clean, rinse away the dirt and the solution using the shower head, sponge or damp clean cloth

 

5. Allow the surface to dry and enjoy your clean, dirt free shower area.

 

 

 

 

 

 


Rss_feed